Driveways
Driveway modifications require the approval of the DRC.
A minimum five (5) foot buffer between the edge of driveway pavement and the property line must be provided. Flares at curb are required for ease of driver when entering driveway.
All driveway surfaces may be broom finished concrete, interlocking brick pavers, or stamped concrete. Concrete driveways may be stained (not painted) with approved stain colors. Approved stain may be clear, brown stain toner colors, or grey stain toner colors. No medallions are allowed in driveway. No mulch or blacktop asphalt driveways will be allowed. Approval of brick paver or stamped concrete driveway is contingent upon execution of Agreement with Seven Oaks Community Development District (contact DRC for Agreement) as well as design and material approval.
Homes constructed with two car garages shall have driveway widths no more than the width of the garage door(s) plus two (2) feet maximum on each side of door(s) not to extend beyond the side plane of the house.2ft extension must stop at the sidewalk.
Homes constructed with three car garages may extend the edge of the driveway a straight line to the sidewalk. It may not extend past the sidewalk to the curb as this is CDD property and cannot be altered.
All driveway alterations shall be the same material and finish as the existing driveway or pavers, no stepping stones are permitted. All alterations must be approved by the DRC.
The apron of your drivway is on Seven Oaks Community Development Distrct (CDD) property. Any modidifications to the apron requre a Drive Apron Agreement that is approved by the CDD.
This site provides information using PDF, visit this link to download the Adobe Acrobat Reader DC software.